Home›Product Catalogue›Engine Parts›Piston with Pin and Clips 297-7750A (STD) for Caterpillar 3066 / S6K / C6.4 Engine (Replaces 297-7750)
Piston with Pin and Clips 297-7750A (STD) for Caterpillar 3066 / S6K / C6.4 Engine (Replaces 297-7750)
Standard piston assembly with pin and clips (102 mm bore, 57.6 mm combustion chamber), replacement for Caterpillar 297-7750. Fits 3066 / S6K / C6.4 (3064 / C4.2) engines.
Piston with Pin and Clips 297-7750A (STD) for Caterpillar 3066 / S6K / C6.4 Engine (Replaces 297-7750)
AI Search Summary
Piston assembly (with pin and clips) for Caterpillar 3066 / S6K / C6.4 engines, replacement for CAT 297-7750. 102 mm bore, fitted on CAT 924G / 7MS1-UP wheel loaders.
Key Facts
MOQ6件
Lead Time15-30 Days
Warranty12 Months
MaterialForged Aluminium Alloy
OEM / Reference
2977750CA2977750297-7750A297-7750
Available — Xi’an consolidation point · reply within 24h
The order we never skip — which is why the wrong part does not reach your site.
01
Confirm
Nameplate, OEM number and working conditions — checked against your machine, confirmed in writing before you pay.
02
Verify
Photos and video of the actual part, packed and labelled, before it leaves. What you see is what ships.
03
Prevent
Send the hour-meter reading and we log the service interval — you get a message before the next one is due.
04
Dispatch
Nothing leaves Xi’an until you reply "ok". You approve, then we ship — not the other way round.
Confirm this part for my machine
Machine model and part number are what let us confirm fitment in writing. Message is optional.
Overview
Fitment Note: Confirmed by the removed part number and the cylinder bore. Standard size, 102 mm bore, 57.6 mm combustion chamber. Supplied as piston + pin + clips; rings quoted separately.
Specifications
MOQ
6 pcs
Type
Piston with Pin and Clips (STD)
Engine
CAT 3066 / S6K / C6.4
Included
Piston + pin + clips
Material
Forged Aluminium Alloy
Position
Cylinder bore
Replaces
CAT 297-7750
Shipping
Rail / Sea / Air
Warranty
12 Months
Lead Time
15-30 Days
Application
CAT 3064T / 3066 engines
Bore Diameter
102 mm
Combustion Chamber
57.60 mm
Engine piston assembly (with piston pin and clips, standard STD) for the Caterpillar 3066 / S6K / C6.4 diesel engine family (also 3064 / C4.2) — a direct replacement for the original Caterpillar 297-7750. Bore diameter 102 mm, combustion chamber diameter 57.60 mm, forged aluminium alloy, finished crown with a coated skirt. The piston reciprocates in the cylinder, takes the combustion load and transfers it to the crankshaft.
The piston is a core engine wear item. Typical failures are ring-groove wear, skirt scuffing / wear, crown burning and pin-bore wear, causing piston slap, blow-by, high oil consumption, power loss and low compression. It is normally replaced as a full set (with the pin, clips and rings) during an overhaul or when the liner is re-bored / replaced.
Supplied as a single assembly (piston + pin + clips; rings supplied separately). Confirm the removed part number, the bore diameter (102 mm) and the compression height before ordering; observe the piston orientation marks and the pin-to-rod fit, then check the liner clearance and ring end gap after assembly.
Key Features
Direct replacement for CAT 297-7750
Standard size, 102 mm bore, 57.6 mm combustion chamber
Forged aluminium alloy with a coated skirt
Supplied as piston + pin + clips (rings available separately)
